By Damion Tyrell, Technology Corporate Electric
Across Toronto, detached garages are quietly becoming apartments — a suite over the garage for family, a tenant, or a caregiver, reached from the laneway. The structure already exists, but its electrical almost never does: most garages run on one borrowed circuit. Technology Corporate Electric wires garage apartments across Toronto and the GTA and for property owners throughout Ontario, treating them as full residential dwellings that borrow commercial-grade planning and industrial-grade durability. Our residential and multi-unit electrical services cover the whole job, from the house panel upgrade that a new apartment usually requires to the final ESA inspection.
Feeding the garage: trench, feeder and subpanel
A legal apartment needs real power: heating, cooking, laundry, hot water and receptacles cannot share a 15-amp lighting circuit. We calculate the combined house-plus-apartment load, then run a properly buried feeder — correct depth, warning tape, and protection where it enters both buildings. At the garage, a subpanel distributes the suite's circuits; inside that subpanel the neutral and ground are kept separate, with grounding electrodes at the detached structure, because bonding belongs only at the main service. Where the house service cannot carry the addition, a service upgrade or a second metered service is the honest answer, and we price both routes before anyone digs.
A real dwelling inside a former garage
Once power arrives, the suite is wired like any Toronto home: dedicated kitchen circuits, GFCI protection in the kitchen and bathroom with neutrals and grounds never bonded downstream, arc-fault protection for sleeping areas, and interconnected smoke and carbon-monoxide alarms. Heating is usually electric or a heat pump, and its load shapes the whole design. Bathroom exhaust, laundry circuits and a proper range supply replace the extension-cord habits of garage life. All splices land inside accessible boxes — in a compact suite there is no excuse for buried junctions — and every circuit is labelled at the subpanel for the tenant who will one day stand there with a flashlight.
Permits, parking and planning ahead
Garage apartments in Toronto run through zoning, building permit and ESA electrical permit processes, and the electrical design has to satisfy all three. We coordinate with the owner's designer so panel locations, meter arrangements and trench routes are settled before work starts. The open trench is also the cheapest moment to plan the laneway's future: a spare conduit costs little today and pays off when the household adds EV charger installation at the laneway parking pad. The same approach serves owners adding suites in Mississauga, Hamilton and smaller Ontario communities — residential comfort, commercial documentation, and workmanship that survives industrial-strength winters.
Frequently asked questions
Can a garage apartment share the house panel? Sometimes, through a subpanel, if the house service has capacity after a load calculation. Many Toronto homes need a service or panel upgrade first.
How deep is the feeder trench to a detached garage? Burial depth depends on the cable or conduit type and whether it passes under a driveway. We follow the Ontario Electrical Safety Code tables and mark the run with warning tape.
Does a garage apartment need its own meter? Not always. A separate meter suits long-term rentals; a subpanel on the house service suits family suites. We explain both before you commit.
Book garage apartment electrical in Toronto
The Electrical Safety Authority publishes the Ontario requirements for additional dwelling units and detached structures. Turning a garage into a suite? Contact a Toronto electrician for garage apartment wiring — call Technology Corporate Electric at 437-435-7053.
By Damion Tyrell, Technology Corporate Electric