By Damion Tyrell, Technology Corporate Electric
Toronto's housing push has turned thousands of single-family homes into duplexes, triplexes, and laneway-plus-basement combinations — and electrical is where conversions succeed or stall. A multi-unit conversion electrical Toronto project is not a big renovation; it is several homes sharing one service entrance, and every system must be separated, metered, and alarmed accordingly. Technology Corporate Electric wires legal conversions across Toronto and the GTA from first load calculation to final ESA sign-off.
Separate metering: how tenants get their own bills
Toronto Hydro metering strategy drives the whole design. Options include individual utility meters per unit — cleanest for billing and resale — or a house meter for common loads alongside unit meters. Each arrangement demands different service equipment: meter stacks or individual sockets, a service sized for the combined calculated load, and clear labelling that will still make sense to a Hydro crew in twenty years.
Decide metering before framing. Moving a meter base after siding and drywall is the kind of rework that eats a conversion budget. Where suites will be rented separately, submetering arrangements and landlord-tenant rules for electricity charges in Ontario also need a conversation — your electrician handles the wiring, but the billing structure should be legal as well as functional. Service capacity is the usual pinch point: adding two kitchens and laundry to a 100-amp house almost always triggers panel upgrade services in Toronto or a full service upgrade to 200 amps.
Panels and circuit separation per unit
Each unit needs its own panel or clearly separated distribution, with no circuits wandering between suites. Shared circuits are the signature defect of illegal conversions: the basement tenant's fridge on the upstairs panel, a hallway light split across two meters. Correct work traces and re-feeds every load to its own unit's panel, gives each suite its own laundry and kitchen circuits to current code, and keeps common loads — exterior lighting, shared laundry if any, sump and furnace where shared — on the house panel, honestly labelled.
Our electrical service areas in the GTA page lists the conversion-heavy districts we work in, from East York bungalows to Scarborough splits.
Fire safety: alarms, separation support, and egress light
Electrical fire-safety duties in a conversion are specific: interconnected smoke alarms and carbon monoxide alarms per unit and per code location, alarm circuits that are not tenant-switchable, and emergency and egress lighting where the building design requires it. Fire separation itself is the builder's scope, but penetrations for cables and panels must be sealed with listed fire-stopping — an inspector will look, and so will the ESA process. Electrical work proceeds under ESA notification with staged inspections; the authority publishes conversion-relevant guidance at esasafe.com.
Think beyond minimums where tenants are concerned: a labelled panel directory, GFCI and AFCI protection current to code in each suite, and tamper-resistant receptacles in family units all reduce landlord callbacks.
Conversions sit at the meeting point of our sectors — residential suites, commercial-grade metering discipline, and industrial-style distribution planning in one building. That blend is exactly the work our crews are built for.
Frequently asked questions
Can I keep one meter and split the bill myself? Ontario rules restrict how landlords resell electricity. Most legal conversions use utility metering per unit or a compliant suite-metering arrangement — decide with both the code and the tenancy rules in view.
How long does conversion electrical take? Rough-in through final typically spans the build: service work early, rough-in at framing, finishes near occupancy. Hydro scheduling for new meters is the timeline wild card.
What if the house has knob-and-tube or aluminum wiring? Conversions almost always require those systems replaced or remediated in affected areas — hiding legacy wiring behind new suites is not an option inspectors accept.
Convert it legally, meter it cleanly
Bring your drawings for a metering and service review before framing starts — contact a Toronto electrician for multi-unit conversion work.
Technology Corporate Electric — residential, commercial and industrial electrical services across Toronto and the GTA. Call 437-435-7053.