Technology Corporate Electric

Standby Generator Hookup in Toronto: Start With the Right Size

Standby Generator Hookup in Toronto: Start With the Right Size

By Damion Tyrell, Technology Corporate Electric

Hero image: Existing file — articles/images/media-generation-substack-17-generator-hero-0-46bdf655-1f55-4da6-98be-9f4e4bdc3268.webp (residential standby generator installed beside a home). Reuse as the Mataroa hero.

A standby generator hookup in Toronto starts with one decision most people rush: the size. Most Toronto homes land between 10 and 22 kilowatts — enough to carry the furnace, fridge, sump pump, lights, and internet through an outage — and the right number comes from a load calculation, not a guess at the showroom. Oversizing wastes money on the unit, the pad, and the gas line; undersizing leaves you dark in the exact storm you bought it for. A licensed electrician in Toronto and the GTA measures your essential loads first, then matches the generator and transfer equipment to them. Where the panel cannot support the added equipment, panel upgrade services in Toronto are planned into the same project, and future loads such as EV charger installation in Toronto are counted before the size is locked in.

Sizing is a load calculation, not a guess

The honest method is simple: list what must run during an outage, add up the running watts, then account for motor starting surges — a furnace blower or sump pump can draw three times its running load for a few seconds at startup. In practice Toronto homes sort into three bands:

  • Essentials only (roughly 7.5–12 kW): furnace, fridge, sump pump, some lights and outlets, internet. The house stays warm, dry, and connected.
  • Most of the house (roughly 14–18 kW): essentials plus kitchen circuits, a well pump where fitted, and selective air conditioning with load management.
  • Whole home (20 kW and up): everything, including full air conditioning and an electric range, usually with automatic load shedding to keep peaks in line.

Businesses size differently: a restaurant protects refrigeration and point-of-sale; a small industrial shop protects controls, compressors, and security. Technology Corporate Electric serves residential, commercial, and industrial clients, and the calculation discipline is the same at every scale.

The hookup itself: transfer equipment and gas

Once the size is set, the installation has three parts. First, the transfer equipment: an automatic transfer switch senses the outage, starts the generator, and moves the house onto generator power in seconds — then reverses the process when the grid returns. Whole-home switches carry the entire panel; partial setups feed a dedicated emergency sub-panel. Second, placement and fuel: the unit sits on a pad outside, clear of windows and doors per code clearances, with a natural gas or propane connection installed by a licensed gas fitter. Third, the electrical hookup itself — generator feeder, grounding and bonding, and control wiring — completed under an ESA notification and inspected before the system goes into service.

Backfeeding through a dryer outlet or a homemade cord is never an acceptable shortcut: it is illegal, it voids insurance, and it can energize lines that utility crews believe are dead.

What happens after install day

A standby generator is a small engine that must exercise weekly, want its oil and filters on schedule, and be tested under real load to be trusted. We hand over every system with its exercise cycle set, its maintenance schedule explained, and its circuits labelled, so the first real outage is a non-event. Toronto's ice storms and summer grid strain are exactly the nights that preparation pays for itself.

Frequently asked questions

Do I need a permit for a standby generator in Toronto? Yes — the electrical work requires an ESA notification and inspection, and the gas connection requires a licensed gas fitter. Both are arranged as part of a proper installation.

How fast does it take over in an outage? Typically within 10 to 20 seconds of the power dropping: the switch senses the loss, starts the engine, and transfers the load automatically.

Can a generator run my EV charger and air conditioner? Often yes with load management, which pauses big loads when the generator is near capacity. That is decided in the sizing calculation, not discovered during a storm.

Size your generator properly

The Electrical Safety Authority publishes the Ontario requirements for generator installations, permits, and inspections, and that guidance is the standard behind every hookup we complete. If you are planning backup power for a home, a business, or a small plant, contact a Toronto electrician for a generator sizing assessment — call Technology Corporate Electric at 437-435-7053.

By Damion Tyrell, Technology Corporate Electric