By Damion Tyrell, Technology Corporate Electric
Tiny homes ask a fair question: how small can a dwelling get before the electrical code stops caring? In Ontario, the answer is never — a tiny home used as a dwelling gets full residential protection, whether it sits on a foundation in the GTA or on a rural lot two hours away. Technology Corporate Electric wires tiny homes for owners across Toronto and all of Ontario, combining residential care with the compact-panel craft of commercial fit-outs and the weatherproofing discipline of industrial outdoor work. Start with our tiny home and secondary suite electrical services; most projects also involve a house panel upgrade to feed the new dwelling.
How a tiny home gets its power
There are three honest routes. A foundation-built tiny home takes a normal service or a feeder from the main house to its own subpanel — neutral and ground separated at the subpanel, bonded only at the main service. A tiny home on wheels connects through a weatherproof pedestal with a proper receptacle and breaker, sized 30 or 50 amps, much like an RV but inspected as a dwelling when it is lived in year-round. A factory-built unit may arrive CSA-certified, and then our work is the site connection and verification. In every case an ESA permit and inspection apply, and winter heating load — not summer lighting — decides the service size.
Big loads in a small box
A tiny home still cooks, showers, heats water and heats space, often all-electric in under 400 square feet. The panel is small but the engineering is not: dedicated circuits for the cooktop, water heater and heat source, combination arc-fault protection for living and sleeping areas, and GFCI protection at the kitchen counter and in the bathroom. Every splice lands inside an accessible box — in a tiny home there is nowhere for a buried junction to hide safely anyway. We favour full-size breakers over tandems where the panel allows, label every circuit in plain language, and leave the owner a load sheet that explains what can run together on a cold January night.
Toronto backyards and Ontario lots
In Toronto, tiny homes arrive as garden-level dwellings and laneway projects; across Ontario they serve as farm-stay units, caregiver suites and four-season cottages. Rural placements add distance: long feeders need voltage-drop calculations, overhead or buried routes need proper clearances and warning tape, and shoreline properties need corrosion-aware fittings. Because a tiny home often shares land with a workshop, barn or charger, we plan the lot's power as one system — including EV charger installation at the main house or parking area on the same mobilization. One design, one permit strategy, one inspection path for the whole property.
Frequently asked questions
Is a tiny home on wheels wired like an RV? The connection can resemble an RV pedestal, but a unit lived in as a dwelling is held to dwelling standards in Ontario, with an ESA permit and inspection.
How many amps does a tiny home need? Most all-electric tiny homes land at 50 to 100 amps once heating, cooking and hot water are counted. A load calculation on your appliance list gives the real number.
Can a tiny home run off the main house panel? Often yes, through a feeder and subpanel, if the house service has capacity. If not, we price a panel or service upgrade as part of the same project.
Book tiny home electrical in Ontario
The Electrical Safety Authority sets the Ontario rules for small dwellings and secondary units. Placing a tiny home in Toronto or anywhere in Ontario? Contact a tiny home electrician — call Technology Corporate Electric at 437-435-7053.
By Damion Tyrell, Technology Corporate Electric